FREE CBD Lip Balm On Orders Over £30

How to Make CBD Vape Juice at Home

CBD vape pens are being utilised by people everywhere for a wide variety of reasons. Because of this, many people are curious about how to make CBD vape oil. If you are a lover of CBD vape, you've come to the right place to learn how to make CBD vape liquid!

This recipe is a surefire way to make an impactful and flavourful vape with CBD isolate UK. This recipe contains a PG/VG base and works great with the Aspire Pocket vape kit, which includes both a Sub OHM and MTL tank.

What You Need to Make CBD Vape Juice at Home

To get started making CBD vape juice at home, there are some items that you will need to make the process of making CBD vape juice from CBD isolate as simple as can be. While some of these items are likely easy to be found lying around your kitchen, the others can be easily obtained with a quick shopping trip online or to your favourite CBD oil shop.

The items you will need are as follows:

  • 500mg CBD Isolate (≥99% Pure)
  • Propylene Glycol
  • Vegetable Glycerin
  • Flavouring Of Choice (Vape Juice Flavouring or Terpenes)
  • Blunt Tip Syringe
  • Digital Scale
  • 30ml Empty Vape Juice Container

Preparing to Make CBD Vape Juice from Isolate

Before getting started, make sure that you are properly prepared and have all of your ingredients and other necessary tools handy. It is also essential that you ensure that you are working in a clean environment, that you have washed your hands, and, if you prefer, are wearing gloves.

Steps to Make MTL CBD Vape Juice

Step 1: Add 14ml PG (Propylene Glycol)

Using the blunt tip syringe, measure out 14ml of Propylene Glycol (PG), and add it to the empty 30ml vape juice container.

Step 2: Add 500mg CBD Isolate to the Mixture

Using your scale, measure out 0.5 grams (500mg) of CBD isolate and carefully add the isolate powder to the vape juice container with the PG mixture. Replace the cap.

Step 3: Mix PG and CBD Thoroughly

Now shake the vape juice container vigorously for several minutes to ensure that the CBD isolate fully dissolves into the PG. Once thoroughly mixed, it should be in a liquid form with no crystallisation.

Step 4: Add 14ml VG (Vegetable Glycerin)

Using the blunt tip syringe, measure out 14ml of Vegetable Glycerin (VG) and add it to the 30ml vape juice container containing the thoroughly mixed combination of PG and CBD isolate. Replace the cap and once again vigorously shake the vape juice container to ensure that the VG is thoroughly mixed with the CBD and PG combo.

Step 5: Add 2ml Vape Juice Flavourings

One of the best parts about being able to make your own CBD anxiety pens at home from isolate is that you can choose your flavour of choice! For this step, you will need 2ml of your vape juice flavouring of choice or 1.5ml of terpenes. Once again, using the blunt tip syringe, measure your flavour additive of choice and add it to the mixture within the vape juice container. Shake vigorously to ensure flavour is mixed thoroughly.

Step 6: Fill Your Vape Tank/Cartridge and Enjoy

The only thing left to do now is to fill your vape tank or cartridge with the homemade CBD vape mixture and enjoy!

Steps to Make SUB OHM CBD Vape Juice

For big smooth clouds, this recipe utilises a 70/30 VG/PG mixture.

Step 1: Add 6ml PG (Propylene Glycol)

Using the blunt tip syringe, measure and add 6ml of Propylene Glycol (PG) to the empty 30ml vape juice container.

Step 2: Add 500mg CBD Isolate to the Mixture

Using your scale, measure 0.5 grams (500mg) of CBD isolate and carefully add the powder to the vape juice container with the PG mixture and replace the cap.

Step 3: Mix PG and CBD Thoroughly

Now shake the vape juice container vigorously for several minutes to ensure that the CBD isolate fully dissolves into the PG. Once thoroughly mixed, it should be in a liquid form with no crystallisation. You may need to warm up the mixture more as there is far less PG compared to the MTL recipe.

Step 4: Add 21ml VG (Vegetable Glycerin)

Using the blunt tip syringe, measure out 21ml of Vegetable Glycerin (VG) and add it to the 30ml vape juice container containing the thoroughly mixed combination of PG and CBD isolates. Replace the cap and once again vigorously shake the vape juice container to ensure that the VG is thoroughly mixed with the CBD and PG combo. VG tends to be sticky and likes to stick to the side of containers, so make sure you give it a couple of extra shakes for good measure!

Step 5: Add 3ml Vape Juice Flavourings

For this setup, you will need 3ml of your vape juice flavouring of choice or 1.5ml of terpenes. Once again, using the blunt tip syringe, measure your flavour additive of choice and add it to the mixture within the vape juice container. Shake vigorously to ensure flavour is mixed thoroughly.

Step 6: Fill Your Vape Tank/Cartridge and Enjoy

The only thing left to do now is to fill your vape tank or cartridge with your homemade sub ohm CBG vape mixture and enjoy!

Big tasty clouds here we come.

Additional Tips for Making CBD Vape at Home

Now that you know how to make vape with CBD isolate let's look at a few tips and tricks that can help make the process that much better!

Storing Your Left Over CBD Vape Juice

It is recommended that when you make CBD vape at home using isolate that you store the vape juice in an amber-coloured container to protect it against UV rays. Amber-coloured vape juice containers are quite common, so it should not be an issue to acquire one if desired.

Terpenes vs. Vape Juice Flavouring

By adding terpenes to CBD isolate, you have changed your CBD vape from an isolate-based CBD vape to a broad-spectrum one which may help to increase the chances of you experiencing what is known as the entourage effect. The entourage effect theory is that cannabinoids such as CBD work better when they synergistically work together with terpenes and other plant-derived compounds.

Whether you utilise terpenes or vape juice flavour additives, it is recommended to let the mixture sit for 24-48 hours before utilising it for optimal flavour!

Preventing Crystallisation and What to Do it if Occurs

To help the CBD isolate dissolve into the PG easier, some people opt for placing their PG/VG near a heat source, be it a heater or in direct sunlight, for a few minutes prior to making their CBD vape at home. If you do not opt to preheat your PG/VG or if you do and crystallisation still occurs, placing your vape juice container near a heating source and periodically shaking it can help to de-crystalise the mixture.

Now you know how to make CBD vape juice from isolate!

Chief Editor Casey A

This article is authored by Dr Casey Abrahamsmen. Dr Abrahamsmen is a board certified physician with over 13 years of experience in internal medicine and pain management. He practises Palliative care at a hospital in Venezuela and is a strong advocative for CBD and believes CBD has a major role to play towards healthy non addictive pain management habits. You can read more about Dr Abrahamsmen here.

This article was peer-reviewed by Dr M Mansoor Siddique (PhD). Dr Siddique has over eight years of experience working with CBD and CBD products.

Disclaimer: All of our products are not intended to diagnose, treat or cure any disease. It is recommended to check with doctor before starting a new dietary supplement program. All CBD products sold have less than 0.2% THC content and abide by both EU an UK law.

18+

only

© Copyright 2020 - CBD Oil King - All Rights Reserved
Address: CBD Oil King HQ, Heron House, Office 16 First Floor, Heigham Road, London, E6 2JG, UK
Tel: 020 8133 9919
Company Number: 13094719
Share via
Copy link